This data set contains sensitive biological resource data for rare terrestrial invertebrates in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector points in this data set represent invertebrate species occurrences. Species-specific abundance, seasonality, status, life history, and source information are stored in relational data tables (described below) designed to be used in conjunction with this spatial data layer. This data set comprises a portion of the Environmental Sensitivity Index (ESI) data for Rhode Island, Connecticut, New York, and New Jersey. ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources. See also the INVERT (Invertebrate Polygons) data layer, part of the larger Rhode Island, Connecticut, New York, and New Jersey ESI database, for additional invertebrate information.
The ESI data were collected, mapped, and digitized to provide environmental data for oil spill planning and response. The Clean Water Act with amendments by the Oil Pollution Act of 1990 requires response plans for immediate and effective protection of sensitive resources.
The biological data were compiled during 1999-2001. The currentness dates for these data range from 1994 to 2001 and are documented in the Source_Information section
DO NOT USE MAPS FOR NAVIGATIONAL PURPOSES. Besides the above warning, there are no use constraints on these data. Note that the ESI database should not be used to the exclusion of other pertinent data or information held by state or federal agencies or other organizations. Likewise, information contained in the database cannot be used in place of consultations with environmental, natural resource, and cultural resource agencies, or in place of field surveys. Recognize that the information contained in the ESI database represents known concentration areas or occurrences of natural, cultural, and human-use resources, but does not necessarily represent the full distribution or range of each species or resource. This is particularly important to recognize when considering potential impacts to protected resources, such as endangered species, wetlands, etc. Acknowledgment of the originators, publishers, contributors, and sources listed would be appreciated in products derived from these data.
This project was supported by the National Oceanic and Atmospheric Administration (NOAA), National Ocean Service, Office of Response and Restoration, Hazardous Materials Response Division, Seattle, Washington
A multi-stage error checking process is used to verify both attribute accuracy and logical consistency throughout data production. The process includes a standardized data entry methodology, hardcopy data review by in-house and external resource experts, a final Quality Assurance/Quality Control (QA/QC) process, and multiple automated logical consistency checks. Quantitative data (such as densities, counts, abundances, or concentrations) provided by resource experts for inclusion in the data set may vary widely in attribute accuracy, depending upon the methodology used to collect and compile such data. For a more detailed evaluation of source data attribute accuracy, contact the sources listed in the Lineage section.
A multi-stage error checking process, described in the above Attribute_Accuracy_Report, is used to verify both attribute accuracy and logical consistency throughout data production. This process includes multiple automated logical consistency checks that test the files for missing or duplicate data, rules for proper coding, GIS topological consistencies (such as dangles, unnecessary node, etc.), and ORACLE(r) to ARC/INFO(r) consistencies. A final review is made by the GIS manager, where the data are written to CD-ROM and the metadata are written. After the data are delivered to NOAA, they are again subjected to a number of quality and consistency checks. In the process of checking for topological and database consistencies, new ID's and RARNUM's or HUNUM's are also generated. The new ID's are a combination of atlas number, element number, and record number. In addition, the value used to represent the element is modified to reflect the type of feature being mapped. In the case of an element that is normally represented by a point or polygon, a value of 20 is added to the standard element value for mapping of linear features. In the case where an element usually mapped as a polygon is represented by a point, a value of 30 is added to the regular element value. The RARNUM's are also modified to include the atlas number, so multiple atlases can be combined and RARNUM's remain unique. RARNUM's are redefined on an element basis, so "resources at risk" groupings will contain only a single element. HUNUM's are also modified to include the atlas number.
These data represent a synthesis of Natural Heritage Program (NHP) digital point data on invertebrate species locations. Refer to the INVERT (Invertebrate Polygons) data layer for additional rare invertebrate species occurrence data. These data do not represent all rare invertebrate species occurrences in Rhode Island, Connecticut, New York, and New Jersey. The following species are included in this data set (Species_ID, Common Name, Scientific Name, if applicable): 366, Woodland pondsnail, Stagnicola catascopium; 367, Eastern pondmussel, Ligumia nasuta; 368, Virginia river snail, Elimia virginica; 369, Turret snail, Valvata tricarinata; 370, Maritime sunflower borer, Papaipema maritima; 371, Mottled duskywing, Erynnis martialis; 372, Goldenrod stem borer, Papaipema duovata; 375, Puritan tiger beetle, Cicindela puritana; 376, Tiger beetle, Cicindela tranquebarica; 377, Tidewater mucket, Leptodea ochracea; 378, Rare insect.
Some spatial components of the biological data sets are developed using regional experts who estimate concentration areas. It is difficult to estimate the positional accuracy of such data, except to state that they are compiled on hardcopy basemaps with a scale of 1:24,000. Many of the spatial components of the biological data sets are developed from pre-existing digital sources and reflect the positional accuracy of these original data. See the Lineage and Process_Description sections for more information on the original data source and how these data were integrated or manipulated to create the final data set. Note that biological resource data by their very nature are considered "fuzzy", and this should be understood when considering the positional accuracy of vector digital objects representing these resources.
Invertebrate Information
Invertebrate Information
Invertebrate Information
Invertebrate Information
Invertebrate Information
Connecticut and New York State Natural Heritage Program (NHP) occurrence data for rare terrestrial invertebrate species were used for this data layer. The data were converted into the ESI data format and plotted onto draft maps. Following the data compilation phase, two sets of draft maps were sent to the resource agencies for review, and edits were made based on recommendations by the resource experts.
7600 Sand Point Way, N.E.
Metadata imported.
Internal feature number.
ESRI
Feature geometry.
ESRI
An identifier that links vector objects in the biology data layers to records in the BIO_LUT data table. ID is a concatenation of atlas number (71), element number (37; 30 because it is a point feature, plus 7, the element value for INVERT), and record number.
NOAA
An identifier that links directly to the BIORES table or the flat format BIOFILE table.
NOAA
An identifier that links records in the BIO_LUT data table to records in the BIORES data table or the flat format BIOFILE data table. RARNUM values of 0 are holes in the polygons and do not contain information.
NOAA
An identifier that links vector objects in the biology data layers to records in the BIO_LUT data table. ID is a concatenation of atlas number (71), element number (37; 30 because it is a point feature, plus 7, the element value for INVERT), and record number. ID values of 9999 are holes in polygons and do not contain information.
NOAA
An identifier that links records in the BIORES data table to records in the BIO_LUT data table or the flat format BIOFILE data table.
NOAA
Numeric identifier for each species that is unique within each element and refers to a nationwide master ESI species list maintained at NOAA.
Research Planning, Inc.
The field CONC refers to "concentration," abundance, or density value of a species at a particular location. No concentration information was available for the invertebrate points data layer.
Research Planning, Inc.
Free text
Research Planning, Inc.
Numeric identifier for the unique monthly presence and life history characteristics of each species at a given location.
Research Planning, Inc.
Geographic source identifier that links records in the BIORES data table to records in the SOURCES data table.
Research Planning, Inc.
Seasonality source identifier that links records in the BIORES data table to records in the SOURCES data table.
Research Planning, Inc.
Major categories of biological data
Research Planning, Inc.
Birds
Research Planning, Inc.
Fish
Research Planning, Inc.
Habitats and plants
Research Planning, Inc.
Invertebrates
Research Planning, Inc.
Marine mammals
Research Planning, Inc.
Reptiles and Amphibians
Research Planning, Inc.
Terrestrial mammals
Research Planning, Inc.
Concatenation of ELEMENT and SPECIES_ID. This item links records in the BIORES data table to records in the SPECIES and STATUS data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT and the next five characters are SPECIES_ID (eg. ELEMENT = 'BIRD' and SPECIES_ID = 1; EL_SPE = 'B00001').
Research Planning, Inc.
Concatenation of ELEMENT, SPECIES_ID, and SEASON_ID. This item links records in the BIORES data table to records in the SEASONAL and BREED data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT, the next five characters are SPECIES_ID, and the last two characters are SEASON_ID (eg. ELEMENT = 'BIRD', SPECIES_ID = 1 and SEASON_ID = 1; EL_SPE_SEA = 'B0000101').
Research Planning, Inc.
Numeric identifier for each species that is unique within each element and refers to a nationwide master ESI species list maintained at NOAA.
Research Planning, Inc.
Species common name
Research Planning, Inc.
Free text
Research Planning, Inc.
Species scientific name
Research Planning, Inc.
Free text
Research Planning, Inc.
Major categories of biological data
Research Planning, Inc.
Birds
Research Planning, Inc.
Fish
Research Planning, Inc.
Habitats and plants
Research Planning, Inc.
Invertebrates
Research Planning, Inc.
Marine Mammals
Research Planning, Inc.
Reptiles and Amphibians
Research Planning, Inc.
Terrestrial Mammals
Research Planning, Inc.
Element subgroup delineating a logical grouping of species.
Research Planning, Inc.
Amphibian
Research Planning, Inc.
Bird
Research Planning, Inc.
Bivalve
Research Planning, Inc.
Cephalopod
Research Planning, Inc.
Crab
Research Planning, Inc.
Diadromous fish
Research Planning, Inc.
Diving bird
Research Planning, Inc.
Estuarine nursery fish
Research Planning, Inc.
Estuarine resident fish
Research Planning, Inc.
Dolphin
Research Planning, Inc.
Fish
Research Planning, Inc.
Freshwater fish
Research Planning, Inc.
Gastropod
Research Planning, Inc.
Gull or tern
Research Planning, Inc.
Insect
Research Planning, Inc.
Lobster
Research Planning, Inc.
Marine benthic fish
Research Planning, Inc.
Marine pelagic fish
Research Planning, Inc.
Passerine or passerine-like bird
Research Planning, Inc.
Pelagic bird
Research Planning, Inc.
Pinniped
Research Planning, Inc.
Plant
Research Planning, Inc.
Raptor
Research Planning, Inc.
Submersed aquatic vegetation
Research Planning, Inc.
Shorebird
Research Planning, Inc.
Small mammal
Research Planning, Inc.
Turtle
Research Planning, Inc.
Upland habitat, plant community, or plant species
Research Planning, Inc.
Wading bird
Research Planning, Inc.
Waterfowl
Research Planning, Inc.
Wetland habitat, plant community, or plant species
Research Planning, Inc.
Whale
Research Planning, Inc.
Natural Heritage Program global ranking
Network of Natural Heritage Program
Date of NHP listing
Research Planning, Inc.
Not ranked
Research Planning, Inc.
mmyyyy
Research Planning, Inc.
Concatenation of ELEMENT and SPECIES_ID. This item links records in the SPECIES data table to records in the BIORES and STATUS data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT and the next five characters are SPECIES_ID (eg. ELEMENT = 'BIRD' and SPECIES_ID = 1; EL_SPE = 'B00001').
Research Planning, Inc.
Major categories of biological data
Research Planning, Inc.
Birds
Research Planning, Inc.
Fish
Research Planning, Inc.
Habitats and plants
Research Planning, Inc.
Invertebrates
Research Planning, Inc.
Marine Mammals
Research Planning, Inc.
Reptiles and Amphibians
Research Planning, Inc.
Terrestrial Mammals
Research Planning, Inc.
Numeric identifier for each species that is unique within each element and refers to a nationwide ESI species list maintained at NOAA.
Research Planning, Inc.
Numeric identifier for the unique monthly presence and life history characteristics of each species at a given location.
Research Planning, Inc.
January
Research Planning, Inc.
Present in January
Research Planning, Inc.
February
Research Planning, Inc.
Present in February
Research Planning, Inc.
March
Research Planning, Inc.
Present in March
Research Planning, Inc.
April
Research Planning, Inc.
Present in April
Research Planning, Inc.
May
Research Planning, Inc.
Present in May
Research Planning, Inc.
June
Research Planning, Inc.
Present in June
Research Planning, Inc.
July
Research Planning, Inc.
Present in July
Research Planning, Inc.
August
Research Planning, Inc.
Present in August
Research Planning, Inc.
September
Research Planning, Inc.
Present in September
Research Planning, Inc.
October
Research Planning, Inc.
Present in October
Research Planning, Inc.
November
Research Planning, Inc.
Present in November
Research Planning, Inc.
December
Research Planning, Inc.
Present in December
Research Planning, Inc.
Concatenation of ELEMENT, SPECIES_ID, and SEASON_ID. This item links records in the SEASONAL data table to records in the BIORES and BREED data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT, the next five characters are SPECIES_ID, and the last two characters are SEASON_ID (eg. ELEMENT = 'BIRD', SPECIES_ID = 1 and SEASON_ID = 1; EL_SPE_SEA = 'B0000101').
Research Planning, Inc.
Concatenation of ELEMENT, SPECIES_ID, and SEASON_ID. This item links records in the BREED data table to records in the BIORES and SEASONAL data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT, the next five characters are SPECIES_ID, and the last two characters are SEASON_ID (eg. ELEMENT = 'BIRD', SPECIES_ID = 1 and SEASON_ID = 1; EL_SPE_SEA = 'B0000101').
Research Planning, Inc.
Two-digit calendar month. Each life history stage or activity type for a particular species can have up to 12 records to account for each month of the year.
Research Planning, Inc.
Life history stage or activity type, where: if ELEMENT is "BIRD" then BREED1 = nesting; if ELEMENT is "FISH" then BREED1 = spawning; if ELEMENT is "INVERT" then BREED1 = spawning/mating; if ELEMENT is "REPTILE" then BREED1 = nesting; if ELEMENT is "M_MAMMAL" then BREED1 = mating. This attribute is not used for HABITAT or T_MAMMAL elements.
Research Planning, Inc.
Life-history stage or activity present
Research Planning, Inc.
Life-history stage or activity not present
Research Planning, Inc.
Breed category not used or not appropriate for record(s) in question
Research Planning, Inc.
Life history stage or activity type, where: if ELEMENT is "BIRD" then BREED2 = laying; if ELEMENT is "FISH" then BREED2 = eggs; if ELEMENT is "INVERT" then BREED2 = eggs; if ELEMENT is "REPTILE" then BREED2 = hatching; if ELEMENT is "M_MAMMAL" then BREED2 = calving. This attribute is not used for HABITAT or T_MAMMAL elements.
Research Planning, Inc.
Life-history stage or activity present
Research Planning, Inc.
Life-history stage or activity not present
Research Planning, Inc.
Breed category not used or not appropriate for record(s) in question
Research Planning, Inc.
Life history stage or activity type, where: if ELEMENT is "BIRD" then BREED3 = hatching; if ELEMENT is "FISH" then BREED3 = larvae; if ELEMENT is "INVERT" then BREED3 = larvae; if ELEMENT is "REPTILE" then BREED3 = internesting; if ELEMENT is "M_MAMMAL" then BREED3 = pupping. This attribute is not used for HABITAT or T_MAMMAL elements
Research Planning, Inc.
Life-history stage or activity present
Research Planning, Inc.
Life-history stage or activity not present
Research Planning, Inc.
Breed category not used or not appropriate for record(s) in question
Research Planning, Inc.
Life history stage or activity type, where: if ELEMENT is "BIRD" then BREED4 = fledging; if ELEMENT is "FISH" then BREED4 = juvenile; if ELEMENT is "INVERT" then BREED4 = juvenile; if ELEMENT is "REPTILE" then BREED4 = juvenile; if ELEMENT is "M_MAMMAL" then BREED4 = molting. This attribute is not used for HABITAT or T_MAMMAL elements.
Research Planning, Inc.
Life-history stage or activity present
Research Planning, Inc.
Life-history stage or activity not present
Research Planning, Inc.
Breed category not used or not appropriate for record(s) in question
Research Planning, Inc.
Life history stage or activity type, where: if ELEMENT is "FISH" then BREED5 = adults; if ELEMENT is "INVERT" then BREED5 = adults; if ELEMENT is "REPTILE" then BREED5 = adults. This attribute is not used for BIRD, M_MAMMAL, HABITAT or T_MAMMAL elements.
Research Planning, Inc.
Life-history stage or activity present
Research Planning, Inc.
Life-history stage or activity not present
Research Planning, Inc.
Breed category not used or not appropriate for record(s) in question
Research Planning, Inc.
Source identifier that links records in the SOURCES data table to the items G_SOURCE and A_SOURCE in the SOC_DAT table, and to G_SOURCE and S_SOURCE in the BIORES table.
Research Planning, Inc.
Author or developer of source material or data set
Research Planning, Inc.
Free text
Research Planning, Inc.
Date of source material, publication, or date of personal communication with expert source
Research Planning, Inc.
mmyyyy
Research Planning, Inc.
Title of source material or data
Research Planning, Inc.
Free text
Research Planning, Inc.
The format of the source material
Research Planning, Inc.
Free text
Research Planning, Inc.
Additional citation information
Research Planning, Inc.
Free text
Research Planning, Inc.
Scale denominator of the source
Research Planning, Inc.
Any integer
Research Planning, Inc.
Date(s) of data collection that the source material is based upon.
Research Planning, Inc.
yyyy
Research Planning, Inc.
Major categories of biological data
Research Planning, Inc.
Birds
Research Planning, Inc.
Fish
Research Planning, Inc.
Habitats and Plants
Research Planning, Inc.
Invertebrates
Research Planning, Inc.
Marine Mammals
Research Planning, Inc.
Reptiles and Amphibians
Research Planning, Inc.
Terrestrial Mammals
Research Planning, Inc.
Numeric identifier for each species that is unique within each element and refers to a nationwide master ESI species list maintained at NOAA
Research Planning, Inc.
Two-letter state abbreviation
Research Planning, Inc.
Two-letter state abbreviation
Research Planning, Inc.
State and Federal status.
Research Planning, Inc.
Federally listed
Research Planning, Inc.
State listed
Research Planning, Inc.
State and federally listed
Research Planning, Inc.
Threatened and endangered status.
Research Planning, Inc.
Endangered on state or federal list
U.S. Fish and Wildlife Service
Threatened on state or federal list
U.S. Fish and Wildlife Service
Species of special concern
Rhode Island Department of Environmental Management, Connecticut Department of Environmental Protection, New York State Department of Environmental Conservation, New Jersey Department of Environmental Protection
Publication date of source material used to assign state and federal status values for each species, if used.
Research Planning, Inc.
mmyyyy
Research Planning, Inc.
Concatenation of ELEMENT and SPECIES_ID. This item links the STATUS data table to the BIORES and SPECIES data tables.
Research Planning, Inc.
Where E is the first character of ELEMENT and the next five characters are SPECIES_ID (eg. ELEMENT = 'BIRD' and SPECIES_ID = 1; EL_SPE = 'B00001').
Research Planning, Inc.
In addition to the geographic data layers, six relational attribute or data tables, BIORES, BREED, SEASONAL, SOURCES, SPECIES, and STATUS, are used to store the complex biological data in the ESI data structure. The geographic data layer containing biological resource information (in this case, INVERTPT) is linked to the Biological Resources table (BIORES) using the unique ID and the lookup table BIO_LUT, or it can be linked directly using RARNUM. The ID is a unique combination of the atlas number (for the Rhode Island, Connecticut, New York, and New Jersey atlas, the number is 71), an element/layer specific number (BIRDS are layer 1, FISH are layer 2, etc.), and a unique record number. The RARNUM represents a unique combination of species, seasonalities, concentrations, and source information. For each of these groupings, a number is generated. That number is concatenated with the atlas number to create a "resource at risk" number that is unique across atlases. BIORES and the other relational data tables are described below in detail. See the Browse_Graphic section for a link to the entity-relationship diagram, which describes the way these tables relate to the geographic data layers and other attribute tables in the ESI data structure. Due to the complexity of the relational database model, the data items are also post-processed into a flat file format. This table, called BIOFILE, may be used in place of the relational files described below to ease simple data queries. The items in the flat file are ELEMENT, SUBELEMENT, NAME, GEN_SPEC, S_F, T_E, NHP, DATE_PUB, CONC, JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC, BREED1, BREED2, BREED3, BREED4, BREED5, RARNUM, G_SOURCE, S_SOURCE, and BREED. All of these items are the same as their counterparts in the individual data tables described below, except the BREED1-BREED5 and BREED items. BREED is a newly generated variable used to link to the BREED_DT data table, a modified, more compact version of the relational BREED data table. BREED1-BREED5 give a text summary of when each life stage occurs within the associated map object. The life stages referred to are the same as those listed in the Detailed_Description of the BREED data table. The link to the BIOFILE may be made through the BIO_LUT, using ID to link to RARNUM, or BIOFILE may be linked directly to the RARNUM in each of the geographic layer's attribute data tables. As mentioned, BREED_DT is an auxiliary support data table to the flat file structure, which allows the user to do searches based on month for seasonal breeding activities. The link from the flat file to BREED_DT is the BREED item. A second supporting data table is SOURCES. This is the same as the source file described above, and the link from the flat file is both G_SOURCE and S_SOURCE. It should be noted that although the flat file eases data query, it is not a normalized database structure, and actual updates performed by the states and other responsible agencies should be done using the relational data tables. The entity-relationship diagram describing relationships between attribute tables in the ESI data structure does NOT include the BIOFILE data table, and this data table is NOT described in detail below.
7600 Sand Point Way N.E.
Although these data have been processed successfully on a computer system at the National Oceanic and Atmospheric Administration, no warranty, expressed or implied, is made by NOAA regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty. NOAA warrants the delivery of this product in computer-readable format, and will offer a replacement copy of the product when the product is determined unreadable by computer-input peripherals, or when the physical medium is delivered in damaged condition.
Contact NOAA for distribution options (see Distributor). ESI data are processed into multiple formats to make them useful to a wider community of GIS/mapping users. Distribution formats include ARC export, MOSS and Shape files, and MARPLOT map folders. An ArcView ESI project and ESI_Viewer product are also included on the distribution CDs for ease of use of the ESI data. The database files are distributed both in the NOAA standard relational database format (see NOAA Technical Memorandum NOS ORCA 115) and in a simplified desktop flat file format. This metadata document includes information on both of these database formats.
7600 Sand Point Way, N.E.